Not sure which type of security or alarm cable your facility or system needs? Hopefully, these answers to common questions can help! What cable is used for alarm systems? Security and alarm systems are usually wired with small-gauge wire specifically designed for the purpose. For instance, many security systems are wired with 12 and 18 AWG gauge alarm wire, as these low-voltage applications do not necessarily require larger, heavier wires. However, larger or wire gauges may be required depending on the circumstances. Also, there are some unique requirements for some systems. For instance, fire alarm cables must be made with specific insulation that is heat resistant and which does not produce toxic smoke when burned. What gauge cable do you need for alarm systems? Only your specific system requirements can answer that question, but often large wire gauges (that is, smaller wires) are used as security and alarm cables because of the low-voltage, low-current application. What is
Your boat’s battery is necessary to start the engine, power the electrical system, including lights and navigation, and much more. For boats powered by a trolling motor, it i the only power source for the vessel. Without it, you would be dead in the water. With that said, here are some high-level ways to take care of your marine battery and cables. Protect and Clean the Terminals The easiest aspect of marine battery maintenance is to keep the terminals clean. Over time, discharge will exude from the terminals, and this corrosion can damage the battery and make it difficult to establish a solid electrical connection. Use a solution of warm water and baking soda with a battery terminal brush or a steel wire brush to scrub them clean from time to time. Then, apply some dielectric grease to the terminals. A thin coating will help prevent water ingress and almost entirely prevent corrosion. Keep the Battery Charged A fully charged battery will last longer than one that is fully disc