Skip to main content

4 Things to Keep in Mind When Buying Boat Battery Cables

Whether you are looking to replace old cables or are simply hoping to have an extra pair on hand, there are a number of factors that could affect your choice in boat battery cables. With any marine project, it’s understandable and even advisable to be extra choosy with the products you use. An electrical problem out on the water is much harder to deal with than one on land. This article will explore 4 things to keep in mind when you go to buy boat battery cables for your boat.

1.Keep Them Certified
Any time you are buying cables for marine use, make sure that you get cables certified by the Society of Automotive Engineers. Certified cables are especially important for battery cables, which deliver the current from your battery to the rest of your electrical system. Certifications are usually very easy to find, generally listed on the product packaging or in the documentation paperwork. Certified cables follow scientifically-researched guidelines put forward by one of the most accomplished and storied trade organizations in the world.

2.Know the Dimensions
Boat battery cables, because of the extra-tough insulation they are made with, are much less flexible than the cables you might use on land. As a result, it’s doubly important to measure the dimensions of your battery compartment and the distance to your engine carefully. Flexing cables more than they are intended to flex can result in severely damaged cables, so make sure that you get the right length of cables for your space. As you can see, getting cables that are too long or too short can cause problems in this instance.

3.Always Buy Tinned Cables
Quality marine cables will always be made out of tinned copper. Tinned copper wires are made up of fine, interwoven strands of copper that have been lined with tin. Tin is much more resistant to corrosion and oxidation than copper is but is also less conductive. By using only a very thin layer of tin, the wires maintain their resistance to corrosion without damaging their conductivity.

Non-tinned copper cables should not be used at all in a marine setting, especially if it's a saltwater environment. Tinned copper cables are the standard for marine use, and using non-tinned copper cables can result in expensive delays, unnecessary repairs, or ruined leisure time.

4.Buy From a Trustworthy Site
Not every website is going to be the right fit for your battery cable supply needs. When choosing a site, make sure to take the time to get to know a bit about the company. Establishing a long-term business relationship with an online supplier can have as much benefit as business relationships with brick-and-mortar corporations, so it’s important to take the time to see if they are the right fit.

If you’d like to skip the search, come see us at www.ewcswire.com. We are a team of professionals serving other professionals, and we know from experience how to help you get the products you need today.

Comments

  1. Arti Rani12 February 2018 at 20:53



    Little Known Way To Bring Nearly ANY Dead Battery Back To Life again..

    Hi

    There’s a new, little known way to bring nearly ANY dead battery back life again…

    I’ve already tried it with car, laptop, and phone batteries that were completely dead ...and now ...they're just like new again!

    >> Click Here To Watch a Presentation that will show you how this is now possible <<

    With this method, you won't have to buy new pricey batteries anymore. You can just recondition your old batteries and save a lot of money.

    And this new battery reconditioning method is so simple and quick…

    >> Click here to learn how to bring your dead batteries back to life again <<

    And this works for car, phone, and laptop batteries!

    It even works with batteries you can use in a solar panel system's battery bank (or other alternative energy system’s battery bank). Plus, many other types of batteries!

    I don’t t how much longer this presentation will be up though (you learn why in the new presentation)…

    So stop what you’re doing and watch the presentation while you still can.

    >> Click Here To Watch The Presentation <<

    Best Regards,
    [Kevin Day]

    P.S. Tom also teaches you how to get dead batteries for free, bring them back to life, then sell them for nice profits! Learn how here: >> Click Here To Learn How <<

    ReplyDelete

Post a Comment

Popular posts from this blog

Are Marine Electrical Wires The Same As Regular Cables?

  In the world of electronics, there is a huge overlap between the different uses of electrical components in various industries. The reason is that anything powered by electricity needs wiring, and they are made according to widely general principles. However, certain environments and uses can push electrical components to the limit, or prove to be extremely taxing for regular components made for all-around use. Components that go onboard an open sea vessel must be able to withstand extremely harsh and prolonged conditions. This includes tools, work equipment, and electronics. As a general rule, always be ready to lose anything you bring on board. The Key Aspects Of Marine Electrical Wire Some think that automotive wire is tough enough for marine use. In fact, automotive wire is specifically made to withstand extreme heat conditions, and be oil resistant. This might prompt many to assume that automotive and marine electrical wires can be used interchangeably. However, certain fea
1 comment
Read more

Things To Look Out For When Looking For Welding Cable For Sale

Are looking for a welding cable for sale online? If you are, then you must be aware of what they are designed for—not for an undemanding profession, that’s for sure. Welding cable is designed for electric arc-welding machines, it is a conductor that carries the power to fire up the metal rod so that a welding professional can get the work done. However, for a welding cable to properly perform what’s it supposed to do, it should meet the right standards for it to be strong enough to perform its job. Why Must a Welding Cable be Durable? This job is not for the weak and that’s not limited to the professional himself but the cable as well. It’s important to know that you’re getting nothing but the most durable and flexible welding cable there is. There’s a current passing through those wires after all. The last thing you need is for your welding cable to overheat, impeding a speedy welding process. You also don’t want your welding cable to face detrimental effects from accidental cuts,
Post a Comment
Read more

Welding Cable for Sale: Three Key Features to Assess

When you’ve got welding cable on its last legs and are looking for a replacement, one of the best things you can do is buy an exact match for the cable you’ve been using (assuming you were using a suitable cable in the first place). That isn’t always possible, so if you’re looking for welding cable for sale , judge quality by these three criteria. Voltage Rating This is the most important single consideration you need to make when looking at prospective welding cables. Voltage rating is an indication of how much voltage the cable can work with, which will impact how much current it can carry as well. Thicker cables can carry a higher voltage than thinner cables, all things considered. Many welding cables are rated to 600V, just like much building wire. Whatever the case, be entirely certain that the application for which the cables are intended is within the cable’s voltage range. Insulation The insulation with which welding cables are made also plays a prime role in how well th
Post a Comment
Read more